RT-USB-9AXIS-00
config.h
1 /*****************************************************************************
2  * config.h: config file for usbcdc example for NXP LPC13xx Family
3  * Microprocessors
4  *
5  * Copyright(C) 2008, NXP Semiconductor
6  * All rights reserved.
7  *
8  * History
9  * 2008.07.19 ver 1.00 Preliminary version, first Release
10  *
11 ******************************************************************************/
12 
13 /*
14 Overview:
15  This example shows how to use the USB driver to implement a CDC class USB peripheral.
16  To run this example, you must attach a USB cable to the board. See
17  the "Getting Started Guide" appendix for details.
18 
19 How to use:
20  Click the debug toolbar button.
21  Click the go button.
22  Plug the LPCXpresso's target side into a PC using a USB cable retrofit
23  or a 3rd party base board.
24 
25  * You should be able to see a new COM port on your PC.
26 */
27 
28 #define NXP_VID 0x1FC9
29 #define MY_VID 0x2B72
30 
31 #define USB_VENDOR_ID MY_VID //(9axis) // Vendor ID
32 #define USB_PROD_ID 0x0003 // Product ID
33 #define USB_DEVICE 0x0100 // Device ID
34 
35 #define LED_PORT 0 // Port for led
36 #define LED_BIT 7 // Bit on port for led
37 
38 
39 /*********************************************************************************
40 ** End Of File
41 *********************************************************************************/